知乎网站内容建设的逻辑商业空间设计概念方案

知乎网站内容建设的逻辑,商业空间设计概念方案,企业做网站etp和源程序,网站建设 微信 app摘 要 本文设计了一款基于STM32F103C8T6单片机的车载环境监测与控制系统。该系统能够实时监测车内温湿度、烟雾浓度、甲醛浓度和粉尘浓度。使用DHT11传感器监测温湿度#xff0c;当温度超出正常范围时#xff0c;系统会自动打开空调#xff08;风扇模拟#xff09;#x…摘 要本文设计了一款基于STM32F103C8T6单片机的车载环境监测与控制系统。该系统能够实时监测车内温湿度、烟雾浓度、甲醛浓度和粉尘浓度。使用DHT11传感器监测温湿度当温度超出正常范围时系统会自动打开空调风扇模拟若温度正常则继续监测温湿度参数。利用MQ-2传感器监测烟雾浓度一旦检测到烟雾浓度异常系统会立即启动风扇进行通风并触发声光报警若烟雾浓度正常则持续监测相关参数。通过MS1100传感器监测甲醛浓度若甲醛浓度超标系统会自动开启风扇通风若浓度正常则继续监测。采用GP2Y1014AU传感器监测粉尘浓度当粉尘浓度过高时系统会启动负离子发生器以净化空气若粉尘浓度正常则保持监测状态。OLED显示模块用于实时显示监测数据同时按键模块允许用户设置各项参数的阈值。系统通过WiFi模块将监测数据实时传输至手机端从而实现了远程监控和参数设置的功能。关键词车载STM32传感器WiFi环境检测AbstractThis paper presents the design of a vehicle environmental monitoring and control system based on the STM32F103C8T6 microcontroller. The system is capable of real-time monitoring of temperature, humidity, smoke concentration, formaldehyde concentration, and dust concentration within the vehicle. For temperature and humidity monitoring, the DHT11 sensor is employed. Should the temperature exceed the predefined normal range, the system will automatically activate the air conditioning unit (simulated by a fan). If the temperature remains within the normal range, continuous monitoring of temperature and humidity parameters will persist. The MQ-2 sensor is utilized for smoke concentration monitoring. Upon detecting abnormal smoke levels, the system will immediately initiate ventilation via the fan and trigger both audio and visual alarms. Normal smoke concentrations result in continued parameter monitoring. Formaldehyde concentration is monitored using the MS1100 sensor. Exceeding standard formaldehyde levels prompts automatic activation of the ventilation fan. Normal concentrations lead to ongoing monitoring. The GP2Y1014AU sensor monitors dust concentration. High dust levels trigger the negative ion generator for air purification. Normal dust concentrations maintain the monitoring state. An OLED display module provides real-time visualization of monitoring data, while a button module enables users to set threshold values for various parameters. Through the WiFi module, the system transmits monitoring data to mobile terminals in real time, thereby enabling remote monitoring and parameter adjustment.Key WordsVehicle;STM32 ;Sensor ; WiFi; Environment Monitoring目 录摘 要Abstract1 引 言1.1 选题背景及意义1.2 国内外发展历程1.2.1 国内研究现状1.2.2 国外研究现状2 系统总体设计2.1 整体设计方案2.2 主要元器件选择2.2.1 主控芯片选型2.2.2 温湿度检测模块选型2.2.3 烟雾检测模块选型2.2.4 甲醛检测模块选型2.2.5 粉尘检测模块选型3 硬件设计3.1 主控电路设计3.2 温湿度检测模块电路设计3.3 烟雾检测模块电路设计3.4 甲醛检测模块电路设计3.5 粉尘检测模块电路设计3.6 执行模块电路设计3.7 显示模块电路设计3.8 按键模块电路设计3.9 声光报警模块电路设计3.10 WiFi模块电路设计4 系统程序设计4.1 开发环境介绍4.2 主程序流程图设计4.3 温湿度检测模块子流程设计4.4 烟雾检测模块子流程设计4.5 甲醛检测模块子流程设计4.6 粉尘检测模块子流程设计4.7 WiFi模块子流程设计4.8 按键模块子流程设计5 系统调试5.1 温湿度检测模块实物测试5.2 烟雾检测模块实物测试5.3 甲醛检测模块实物测试5.4 粉尘检测模块实物测试5.5 WiFi模块实物测试5.6 测试结果6 结 论参考文献附录A 原理图附录B PCB附录C 主程序致 谢